The Silicone Rabbit vibrator is designed for those who are interested in simultaneous vaginal and clitoral stimulation. The rotating beads and penis shaped body arouse the vagina while the protruding rabbit ears (hence the name) rumble against the clit.

This product claims to be 100% waterproof. So, I dunked my entire toy under water in my bathtub and when I pulled it out, it was all good. There was no water in the battery/motor area and everything was fine.

The toy is on the loud side, so it would not be ideal for someone with roommates, or anyone who shares a room.

I would not call this product discreet. It's rather large and it just looks like a vibrator. It's obvious, you know? Don't let the size of the product intimidate beginners. This toy will work well for anyone at any experience level and would be ideal for singles and couples alike.

The Silicone Jack Rabbit has a few different materials to it, the majority of it is made of silicone, which receives a 10 on the EdenFantasys scale for safety. Silicone is known to repel dirt and bacteria, can be sterilized, and is smooth and non-porous. It's made of food-grade material, is hypo-allergenic, latex and phthalates free. There is also no smell or taste to this part of the toy. Keep in mind that since this toy has a motor so it can't be completely sterilized! (More on that later.)

It also retains heat, which means that you can allow the insertable portion of this toy a few minutes in a bowl of warm water and it will retain that warmth upon insertion.

It has a tiny bit of flexibility, but not much, most of it in the "rabbit" and "rabbit ears" part of the device. The product has little drag, but still a smooth feel to it. Mine picks up a tiny bit of fuzzies, but not much.

There is a seam, but it is only felt with fingers and not while the product is inserted.

The handle is made of hard plastic, which receives an 8 on the EdenFantasys scale for safety. There is no smell or taste to this part of the toy. The plastic is non-porous is phthalate-free, firm and smooth. This part of the toy is not insertable. It's the base for the control panel and also holds the battery pack inside it.

There are six columns (three stainless steel beads to each column) of beads inside the Silicone Jack Rabbit. They are covered with silicone.

The Silicone Jack Rabbit is designed by Cal Exotics and is targeted to rouse both the vaginal and clitoral areas. The 1 inch rabbit ears provide stimulation directly to the clitoris while the rotating beads (about 5.5 inches around at its widest) and penis shaped shaft (insertable length of about 5 inches) give the vagina a rumbling good time. The "rabbit" extension is about 3.5 inches (not counting those 1 inch vibrating ears - although the entire rabbit extension does pulsate and vibrate as well).




The bottom plastic part of the toy is about 3 inches long and houses the battery pack inside and the control panel on top. It takes three AA batteries (although the product page says AAA batteries) and I used Rayovac batteries in mine (for those who are interested).


The entire toy weighs about 11.5 ounces and is about 10 inches in length.


HINT: Tiny (and I mean tiny) design flaw - the cap at the bottom where the battery pack is located is sometimes a bit tricky. This is not a HUGE deal, just a little something to be wary of. This doesn't affect the overall quality of the toy, but I just thought I'd mention it.

The Silicone Jack Rabbit is noisy. It seems to get louder when pressure is applied to it. You can hear it if you are in the same room, even if it's under the covers. If all is quiet, you can hear it right outside the door.

I'll give you some examples of the controls:

First, let's start with a picture of what the controls look like so that you have a mapped out version of what I'm referring to.


The wave button on the bottom controls the rabbit extension/rabbit ears. There are seven different variations of vibrations, but only three different levels of intensity.

Level 1: This is a constant low rumble on the toy's lowest intensity. During this cycle, all three of the small pink hearts located below the wave button will blink.

Level 2: This is a constant, more "buzzy" vibration on the toy's middle intensity. During this cycle, all three of the small pink hearts located below the wave button will blink faster than they did on the previous level.

Level 3: This is a constant and the most buzzy vibration on the toy's highest intensity. During this cycle, all three of the small pink hearts located below the wave button will stay lit up.

Level 4: We're back to the lowest level of intensity, but it's quickly pulsating with a very small space of time between. The three little hearts below the wave button are lighting up in tune with the quick pulses.

Level 5: This is a climaxing level, climbing quickly from the toy's lowest intensity to it's highest and staying at it's highest for about 2 seconds. The little pink lights are blinking in tune with the climaxing of the intensity of the toy.

Level 6: This level is much like level 4, where the vibrations pulse, but now with the toy's highest intensity and with a very small space of time between. All three heart lights are blinking in tune with the pulsing.

Level 7: This level is the pulsating of the toy's highest intensity for three times in a row and then a longer (2 seconds) of constant vibration of it's highest intensity.

If you press the wave button, they start all over again.

Now, moving on to the other functions. We're going to skip what looks like the up and down arrow button and move up to the UP arrow.

The UP Arrow: This activates the beads and the insertable penis part of the toy to begin turning in a clockwise motion. I can squeeze my thumb and finger around the beads and they will stop moving so it doesn't take much pressure to slow the motor. If the beads stop, the penis stops. If you press this button once more, the turning becomes faster, and once more, even faster. There are three hearts on the top of the control panel (just like on the bottom) that will show you what intensity you are at by lighting up.

The Down Arrow: This slows the beads and the insertable penis part of the toy until it comes to a complete stop.

Back to that button that has the arrows going in a circle. Press that button and it changes the direction that the beads and the insertable portion of the toy from clockwise to counter-clockwise. Interesting, ehh?

Now, to turn this toy off at ANY time, just press and hold down the wave button. You don't have to go through all of the functions.

The rotation of the beads were not overwhelming, but not completely weak either. Just keep in mind that I could stop them by giving a good hard squeeze with my fingers, so you can be the judge of what you think will work for you. The rabbit vibrations were fairly intense and enjoyable.

Because this toy has a motor, it can't be fully sterilized. Please be aware that because it can't be completely sterilized, you don't need to share this toy without using a condom.

A quick and easy way to disinfect/sanitize and clean are:
1. Use a clean, soft cloth and a 10% bleach solution to wipe down the toy.
2. Toy wipes, or any other wipe that says “sanitizing” or “anti-bacterial” on the packaging.
3. Use a clean soft cloth soaked with a soapy water solution. Rub together a bit of antibacterial soap and warm water and give the toy a good wipe down.
4. Use a tiny bit of rubbing alcohol.

Let the toy air dry.

HINT: Some toys have little crevices and funky little spaces that you need to get into in order to clean. An old toothbrush is perfect for those itty bitty places.

HINT: Always rinse your toy really well. You don't want to miss a spot when rinsing and have any of these cleaning products light your "Hello Kitty" on fire.

Don't store the batteries in the Silicone Jack Rabbit unless you're using it daily. You don't want it to get bumped, turned on accidentally; resulting in a case of bad timing or dead batteries.

Individual bags that fit each toy is a great way to store items. A bag made from 100% cotton will be the best to keep lint and fuzzies off of this product. A few reasons that this toy might be difficult to store smoothly are its tackiness (since it's partially made from silicone) and its 10 inch length. Check out EdenFantasys Storage to see if there's anything that might suit your needs.

Water based lubes are suggested for this product. Since this toy is waterproof, try using coconut oil as a natural lubricant when in the water.

The Silicone Jack Rabbit came in a large, clear, rectangular plastic box with a plastic insert inside that held the toy.


The box itself is very informative about product controls and functions of the toy, the fact that it's waterproof and made of silicone. It even suggests water based lubricant.


It's not a good box for storage. Even with the toy out of the box, it's not discreet at all, being that it's clear with a big picture of a vibrator on the side and back of the box.