When I first saw this Liberator shape I knew I had to have it. The Wing turns your favorite vibrators and dildos into hands free toys. The Wing is 24 inches long, 15 inches wide and 9 inches tall. The inner core is made of an eco-friendly polyurethane furniture grade foam. There is a inner liner made of polyester and a nylon microfiber outer cover.

The top of the Wing has a 4 inch slit that is not far from the end of the wing (about 1 1/2 inches from the edge.) This is where you will be putting your toys. You simply turn on the toy (if you are using a toy that requires turning on) and slide it into the slit. The foam is firm and holds the toy securely erect.

Liberator recommends toys that are at least 1 1/4 inches in diameter and are not made of hard plastic or have a high gloss finish, as they tend to slip around. Using toys that are made of silicone, rubber, jelly anything with a little bit of a drag to it will stay in place beautifully, a slick smooth toy will just pretty much get pushed down into the slit in the foam.

If you have toys that have bases on them you can easily use them with the wing. I have a realistic dildo that has balls on it and it in no way fits into the slit in the foam, but you can slide the flared base under the micro fiber cover and it holds in place nicely. It might not be as sturdy as when your toy is inserted into the foam, but it still works wonderfully.

The bottom side of the Wing has a half circle "ditch" that runs the length of the pillow. On the same end as the slit (on the other side of the pillow) is a circular hole. It's about 1 3/4 inches wide and easily allowed room for a hard plastic vibe with a 4 inch circumference. Now in this portion of the pillow a smooth toy is preferable. You simply turn the toy on the vibration that you want and slip it all the way into the channel. The foam will radiate the vibrations throughout the pillow. The vibrations are somewhat dulled by the foam but the sound gets a little louder. The toys tend to kind of buzz when inserted fully into the channel.

The inner liner and the outer cover both have a 36 1/2 inch long zipper that goes down half of the short end, all the way down the long side and end half way down the other short side. So half of the covers unzip for easy removal.

To wash the cover, simply remove it, zip it closed and toss it in the wash with a cool temperature on delicate. Tumble dry on low heat. When re-covering the wing be sure to line up the hole in the top of the cover with the hole in the foam where your toy goes. Be sure to wash the wing cover before the first use, and then as needed after future uses.

The wing comes in a large packing box with a clear plastic bag over the actual pillow. there is also a sheet of paper with the use and care instructions.

The Wing is pretty much intended to put a toy into the slit and be ridden. But you can also use the wing as a support pillow also. Position the wing under your lower waist and use it to help support you in the doggy style position. You can also position it under your back side to help give you some extra elevation.

I L-O-V-E this wing. It has to be one of my top 3 most used toys for solo play and one of the top 10 for partner play. I am in love with the fact that I can make almost any toy hands free. With a partner I use the shape to help prop myself up. It's the very best liberator shape!