The Lockable Sex Toy Case by BMS Enterprises is available in light pink, lavender, and black. I have the lavender coloured chest. The case doesn’t have any packaging to it other than being wrapped in bubble wrap for protection during shipping. There was a cardboard tag attached to the handle when it had arrived. The front of the tag states the product name and has a butterfly and swirl design. The back of the tag states the product name, company name, website, and company contact information. The tag opens up and the inside states the instructions on how to set the combination lock to the case.



The manufacturer’s website states that the case is made of metal and ABS, which is plastic. The product page here at EF states that there is also vinyl and suede to the case. The lining on the inside of the box is vinyl. The lining is on both top and bottom of the inside of the case. It is black in colour. I’m not exactly sure where the suede to the case is though.

The lavender and pink coloured cases are very feminine in appearance. Both coloured cases have a butterfly and flower pattern to them. The black case, judging from the stock photo, does not have any design on it at all. My partner really likes the look of the case and wants to get the black one since it doesn’t have any feminine patterns to it.

The case is fairly small. It measures 12 inches long, 4 inches wide, and 4 inches tall. There is a silver coloured handle at the top centre of the case. The handle is made of plastic. The case is quite light. The very bottom of the case has a plastic piece on each corner. I assume this is so that the bottom of the case doesn’t get scuffed up when you have it set down.



The inside of the case measures 11 ½ inches long, 3 ½ inches wide, and has a depth of approximately 2 ½ inches. You could put things in the case that are thicker than 2 ½ inches though because the lid has an approximate 1 inch depth to it. The lining had a few loose threads to it when it had arrived. Despite the few loose threads, the lining seems to be secure. This case would work well for smaller toys or items such as cock rings, beads, pasties, etc. You could also use the case for storing non-sexual items in like makeup, change (coins), jewellery, whatever!



There is a small plastic tab behind the combination dials when you first receive the case. To set the combination to the lock, you’ll need to remove the plastic piece behind the dials. If you don’t remove it, you won’t be able to lock it. The included directions and diagram on the cardboard tag are really easy to understand/follow.

The combination of the lock when you first receive it is “000”. There are three dials, each with the numbers 0-9 on them. You can make the combination whatever you would like from 000-999. The directions state that it’s important to write your password down since it cannot be recovered. If you were to lose your password and needed to open the case, I assume that you could open the case by completely destroying it. There is a small gap between the lid and bottom of the case that I can stick my fingernail through. I don’t want to ruin the case so I’m not going to test this theory but I think that if you were to take a butter knife and slide it between this area that you’d be able to open the case (and destroy it in the process).



To set the combination, you need to have the lock open. To open the lock you just push the square button to the right. With the lock open, you now need to push the square piece to the left. While keeping the square piece over to the far left, you’ll need to turn the dials to the password that you want to use. Once you have the pass code of your choice you can let the square button go. Once you’ve done this, you’ll need to use that same 3-digit code every time you want to open up the case. It’s really easy to set the combination. The dials turn easily and as I had mentioned, the instruction manual is really helpful. You can change the code as often as you’d like, by repeating the same steps that I had stated above.

...continued

Below are a few photos to give you a better idea of the size. The first set of photos shows what toys I was able to put into the box (at the same time). The toys I was able to fit into the box are as follows: Dai-Do #5 (with storage pouch), Dai-Do #6 (with storage pouch), Inspire Dual Exciter Attachment, Inspire Triple Tease Attachment, Amber Wave (with storage pouch), Fukuoku Massage Glove, Xtreme Pack Bullet, and the Key Charms Plush (with storage pouch). I understand that not everybody has these toys so the second set of photos show you a 500mL bottle of water inside of the case.





The overall quality of the case is good. It’s a bit small but would be great for smaller sized toys or other items. I also think the price is excellent. The combination lock dials are really easy to use. I wasn’t able to force the lock open with my hands when I had tried. Of course, if you took a butter knife to it you might be able to open it. I couldn’t do it with my hands though. If you need to clean the inside or outside of the case, you can just wipe it down with a damp washcloth and a bit of soap when needed.

Other than the case being small, I think it’s a great product. As long as you’re okay with, and aware of, the size- I’d recommend it! I’m actually thinking of purchasing a few more to give to a couple of friends of mine.