Bigger, longer lasting, stimulating, and couple fun: all of these are terms that describe cock rings. Some guys need them to sustain an erection, some like the look, while others look for something that both partners can enjoy. This is what cock rings are all about.

To use, simply apply quality water based lube to your cock and the inside of the ring and slip it on. With the Bedroom Kandi you can be soft or hard, as the ring is very stretchy; you will also find the ring is comfortable to wear. Turn on the vibe, find a setting you both like, and let the pleasure begin.

As with any cock ring, it is recommended not to wear them for longer than 20-30 minutes without a break of an hour or more. I don't know about you, but a purple cock is not that appealing to me, plus you could cause lasting damage.

To start with, you get a smoky transparent ring made out of Elastomer that houses the egg vibe and surrounds your cock. It has the Bedroom Kandi logo on one side of the vibe sleeve in the center, while the rest of the sleeve has a criss-cross pattern molded into it. The texture is not felt during use, but it does add to the visual appeal.

Next up, the vibe. It has a wonderfully smooth, matte finished hot pink silicone coating surrounding a plastic (I assume) core. It does have some drag when drawn against the skin, but the good part is that it does not collect dust bunnies like some silicone does. "OhMiBod" is embossed across one side and "BK" is on the other. If used as just an egg vibe you may not feel it; of course, when in the sleeve, you certainly will not.

Neither of the materials has a bad smell or taste. Elastomer may retain some smells but nothing I have noticed so far.

Elastomer is porous, so sharing is not advised unless a condom is used. Note that the condom should be put on after the ring; the ring could cause the condom to tear, so keep that in mind. The silicone is non-porous, so sharing could be possible, but this is somewhat tricky. See the care section for more info.

Interesting to note: we all know not to store dissimilar materials together, right? This is one exception to this rule. Both the ring and egg come packaged lying against each other and I have stored them like that since I received it with no signs of damage of any kind. Bonus!

Here is where things get interesting. Chances are we all have had that moment when we open a new package up and say, "Holy cow, that thing's huge," right? Well, folks, that's just what happens when you see this cock ring. Just imagine a standard egg vibe attached to a cock ring, because that is basically what you get with the Bedroom Kandi. Here is a picture of the vibe with a standard egg and bullet for a comparison.



The vibe is actually bigger than an egg. So what, you may ask? Well, folks, one of the most common complaints from my wife (and other folks as well) is that the vibe does not reach their clit during use. I am happy to say that this is not the case here. From the shaft of your cock the vibe reaches a whopping 1 1/4" high. What's even better is that that vibe is only about 1/8" away from the shaft. This means that you and your partner will enjoy the vibes equally. Can you say, "Hell ya!"

The ring has an unstretched diameter of one inch and is one inch wide. The sleeve for the vibe has slightly smaller diameter of 7/8". It will easily stretch to fit over a pop can, so it will fit everyone unless you are hung like King Kong,; hell, it might fit him, too. This also is nice as you can put it on and take it off with ease. Unfortunately, this may be a double edged sword for some. While it will fit just about every guy, it may not provide enough restriction for those that need it. Furthermore, since it IS so stretchy, you could wear this one longer than the recommended time: just be sure to listen to your body during long term wear. If any discoloration or pain is felt, remove it A.S.A.P..

You can wear this ring on the shaft or around both the cock and balls. I find that wearing it around the whole package keeps it in place better, which my wife appreciates.

You get three steady vibrations that start on a low setting and increase with intensity, and four patterns, for a total of seven wonderful vibration settings to choose from. You simply press the button located on the side of the vibe and hold for a few seconds to turn it on; then, by pressing the button again, you can cycle through the settings. The button is somewhat hard to press (it's tight), but this just means you will not change the setting unless you want to. Press and hold the button for a few seconds to turn it off.

The vibe is rechargeable via a USB port on your computer; you can also buy a USB port that will plug into an electrical socket if needed. This may be required if charging on the computer is not feasible due to kids or where discretion is needed. On the opposite side from the on/off button is the charge port. The first time I went to charge it I thought that maybe they forgot to put one on mine: I could not see any hole or seam from the hole in the end. Rest assured, it is there - they just did a wonderful job in molding the hole into the vibe. Gently insert the plug into the center of the vibe and it will slide right in.


As you can see in the first pic the hole is not visible.

Also you can see the tight fit for the plug.

It takes two hours to fully charge the vibe, which will give you two hours of use according to the instructions. I have used it four times so far, mostly on the medium steady setting, and it is still just as strong as the first time we used it. I am guessing that is about two hours total.

The battery is a Lithium-Ion, 3.7V with 180mAH of power. You cannot replace it when it dies so please recycle.

The vibe, since it is silicone, can be sanitized by a 10% bleach solution, but the vibe is only splash proof so do not soak it. It is better to spray it on and rinse it off. For both the ring and the vibe you can use an antibacterial soap, toy cleaner, and warm water for cleaning.

Make sure the vibe is dry before charging; since the vibe charge port seals so well, there is no chance of the water evaporating or coming out if it gets inside.

Here are a few pictures of the packaging for your viewing pleasure.

This is how it comes: it is wrapped in plastic surrounding a thin cardboard box. The top has the BK logo, and the bottom has a picture of the ring and description. Inside you will find a hard, paper covered box: the top has the BK logo, and you will also find the OhMiBid logo on the front of it. It has a hinged lid that holds the vibe, ring, and charging cord. There is a foam cut out covered with a silk like material. You will also find an instruction booklet with care and use instructions written in seven different languages.

Once you recycle the outer box the storage box is pretty discreet, and I find no reason why you could not leave it out.

As I said earlier, the ring is pretty stretchy. Even for my slightly larger than average size it did not make me rock hard like some rings do. I do not mind, though, as it lets me wear it longer, which the wife likes a LOT! I would say this makes it perfect for newbies and advanced users alike. For those that NEED a cock ring to sustain an erection, you may want to look at something else.

I am on the fence about this one. I do love the vibes, the fit, and the ability to wear it longer. I do not like that it takes some length away from my tool. This, by the way, is my wife's only complaint about it too. She loves that it reaches her clit and the rumbly vibes, but she like to feel those vibes deep inside too.

I will still recommend it to those that like a bigger vibe for the clitoris and those that do not need the restriction. It is well made and should last for a good long time. Even if the ring wears out or breaks, the vibe will still have plenty of uses.