I'm sure some of you have always thought about taking your significant other's cock and bending it at times, right? Well, now you can leave that poor guy alone and take it out on the EZ Bend Stud!

The Stud is perfect for vaginal or anal use. Its size is ideal for most and would be great for beginners. It has a very lifelike feel and produces enough power to arouse even the most stubborn-to-stimulate areas. The most unique feature of this toy is its ability to bend in any direction until you find the perfect spot. It's great to experiment with all of the different combinations of positions the toy can produce. One of my favorite things to do is to bend the shaft down and then turn it upside down upon insertion. This angles the cock upwards to stimulate the G-spot while letting the soft balls bounce against your clit. It also works well for just clitoral stimulation.

I recommend using an adequate amount of water-based lube before insertion. Once it's inside for a couple of minutes, you can really feel the Futurotic material begin to warm up. You'll slowly begin to forget this stud isn't the real thing!

The EZ Bend Stud Ballsy is made of Futurotic material. It's just like CyberSkin, both being very soft, flexible, and realistic. This is one of my favorite types of materials when looking for a toy that actually feels real. The longer you keep it inside, the more body heat it retains. After a couple of minutes, you won't be able to tell the difference between it and the real thing. The bad thing about CyberSkin is that it's extremely porous, making it harder to clean and easier for germs to hide. I always wash these types of toys before and after each use with antibacterial soap or a toy cleaner. It's also recommended to use a condom, especially if the toy is being shared.

The toy did produce a light odor that reminds me of the smell of a powdered rubber glove. You can smell it on your hands after touching it. The odor was stronger at first and has gradually faded away after a couple of washings. It's not as noticeable now.

If texture is your thing, this should be right down your alley! It's packed with bulging veins and creases that are very apparent upon insertion. It's highly detailed, starting from the wrinkles in the balls to the excess foreskin pulled back from the tip. It has a well-defined head that is soft and squishy and a center-line ridge that runs down the entire length of the bottom side of the shaft. This ridge has a few dips and dives, which help increase stimulation. No details were skipped in the realistic textures of this toy.

The EZ Bend Stud Ballsy has a unique design feature in which it can be bent in all directions while retaining the position it's set to. It has a flexible spine that runs down its center core, which allows for easy adjustments. The spine is made of a hard plastic material, which can only be felt while squeezing with moderate pressure. It isn't noticeable while using it. The flexible spine runs from the base of the shaft and stops just before the head of the penis begins. The entire head is completely soft and squishy.

It runs on three AAA batteries, which are inserted into the base with a twist-lock cap. While inserting the batteries, I noticed it takes a lot of force to tighten the cap to its closed position. The vibrator will not work unless it's completely tight. It felt like I had it closed, but I literally had to force it about another 1/8 of a turn until it snapped in place.

I'm not sure why, but while I was looking at some of the other videos and reviews of this toy, I thought it would be larger. When it arrived, I was surprised that it really wasn't that big. It's 5 1/2 inches insertable and 1 3/4 inches in diameter. I think most users will find the size ideal, also making it perfect for beginners.

The EZ Bend Stud gives you the ability to adjust the angles of the cock to hit all the right spots. It's also great for G-spot stimulation. The intensity of the vibrations are adjusted by its dial base. Vibrations are constant, and there are no other options like a pulsating feature. You can easily adjust the power levels with the turn of two fingers.

The batteries are contained inside the toy, which is nice because you don't have to worry about wires or remote controls getting in the way. The vibrations are most powerful from the tip of the penis and gradually fade toward the base of the shaft. The power level of the vibrations can be adjusted from mild to wild. The highest setting should pack enough of a punch to get most anyone off.

When I first powered the toy up, it was pretty loud. I think it was because the battery cap wasn't on as tight as it could've been, and it produced a rattle effect. It really takes some force to get the cap tightened securely. Once I had the cap tight, it seemed to quiet down. I would describe the overall noise level as about average to other similar vibrators of this size. You can slightly hear it on full power through a closed door in a completely quiet room.

The EZ bend is labeled as waterproof, but it doesn't have an O-ring on the battery cap. Because of this, I wouldn't submerge it in water. It should be fine for use in the shower or for cleaning it under the faucet.

The EZ Bend Stud is made of Futurotic/CyberSkin material. It's extremely porous, making it harder to clean and easier for germs to hide. It arrived with a light dusting of powder that should be washed off before use. I always wash this type of material before and after each use with warm water and an antibacterial soap or with toy cleaner. It will feel slightly tacky to the touch until it's thoroughly dried. After it's completely dried, you can lightly dust it with cornstarch to help maintain the original soft texture that's easy to stroke.

CyberSkin easily attracts hairs and other household debris. It also needs to be stored separately from other toys to prevent it from chemically breaking down. I've lost a few toys this way in the past; they basically just melt into a wet puddle of gunk. Drawstring toy pouches work great to prevent this from happening. In the worst case scenario, you can use zip-lock bags or keep it in the original bubble plastic packaging. Make sure you are only using water-based lubricants with this toy. Anything else can cause it to break down, melt, and deteriorate.

The EZ bend was packaged in your standard plastic bubble packaging that snaps open and closed. This type of packaging isn't my favorite because I like to know that I'm the first person to handle my new toy. I always prefer to at least have something enclosed in sealed plastic. The instructions were included and are simple to follow. The hardest part about operating it is getting the battery cap tight enough. It even has a sticker on the cap that says, "Must close cap tightly." You can re-use the packaging for storage, but in my opinion, it takes up too much space. A drawstring pouch would have been ideal.