I’ve been looking for a harness to allow for internal dildo wear, with the option of holding one or two dildos. The Butt & Dildo g-string Harness from Spartacus looked like it would fill the bill, so to speak.

The harness is not really a g-string, but more like a thong. It is made of leather and has a nice leather smell. It’s durable and well-crafted. The outer finishing is matte and smooth black, and the inside is unfinished, yet fairly soft. Leather is water resistant and can be cleaned with a damp cloth and a mild soap if necessary.

The straps that go around the waist are 1 1/2" wide. There are actually two straps that connect. The front strap is 24” long and has holes 1” apart from 2” to 11” in on each side. The holes are not pushed through all the way to allow the buckle piece to be used right away, but gently pushing the piece through from the other side opens the hole enough for use.

The back strap is 22” long from buckle end to buckle end. The leather part is 19 1/2" of this. Each buckle is solid and large. The buckles are silver, and the leather loops over each buckle and is fastened by two silver rivets. The waist strap is quite adjustable, and will fit up to a 42” waist. At the largest fit, the strap flaps fit just under the metal belt loop.

The crotch strap attaches to the front, and back of the waist piece, by slipping it through silver metal cinch pulls. This strap is 36” long and 1” wide. It’s easy to adjust by pulling on the end, and cinching it up as tight as needed.

The dildo holder consists of two rectangular leather pieces 6” long and 3” wide riveted in two places in the middle. It can be slid up and down the crotch strap for positioning. The crotch strap threads through the holder to hold it against the strap.

The dildo holder has two circular openings. The large opening, meant to hold the vaginal dildo, has a diameter of 1 3/8”, and the smaller opening for the anal dildo has a diameter of 1”. About 1” of leather separates each hole. For some perspective, the large silk dildo will not fit, but the medium and small silks will. You can also use a vibrating toy as long as it has a flat base (wired seemed to be the best, as the wire could be fished up through the waist strap and the controller hung over).

The dildo holder can be unthreaded, and rethreaded, so that the holes face outwards to use as a partner penetration harness. Threading it on and off is not difficult, but I’m not sure there aren’t better partner harnesses out there for this purpose.

While this is a useful harness, it has some problems.
- Lint/loose leather pieces from the unfinished side of the holder transfer onto the dildos very easily, causing the dildos to be in need of another bath before use.
- It’s difficult to get the harness on yourself. The trickiest part is getting the dildos inserted snugly without them popping out.
- While toys with round bases like the silks will work, oval or rectangular bases fit better and allow for a tighter cinch.
- The holes aren’t a bad distance apart for me, but some may find the distance too wide or too narrow for a comfortable fit, and the size of the dildo bases affects how the holder bends to the body.
- The holder is rectangular, and stops you from closing your legs all the way. It’s not very comfortable, and I didn’t want to wear this out due to the rubbing I felt. It would have been better with a piece that was hourglass shaped to fit and hug better.
- It’s too bulky to wear under anything other than a loose skirt, and even then it’s not the most discreet.

This was fun once we got it figured out, and it was arousing to wear around the house under a skirt. It tormented my husband quite effectively. We also got a wireless bullet inserted in the front, and the strap held it nicely in place.

I’m hoping that with more use, it will become more flexible and comfortable. I’m also going to look for different dildos and a different holder to use, or try and make some modifications.

After making some modification to the dildo holder, this fits better and is more enjoyable to wear. I do wish it held larger dildos in place, though, and was not so bulky. I am still looking for another holder piece that will accommodate larger toys.

I'd like to find something in this style for wear outside the house, but for inside the house, this is fun for occasional use.