The Jolly Rider Diva harness is a double-strap, corset-back harness with an interchangeable O-ring to accommodate any of the wearer's needs. It is a vibrant red, with multiple areas for adjustment to suit any size person with any taste. Though I wouldn't suggest buying the harness to someone new (dropping over a hundred dollars on a harness when you're unsure isn't the best idea), it definitely is a well-made, substantial harness for those who are harness enthusiasts (or who are looking for a beautifully constructed, leather harness).

Made of luxuriously smooth and wonderfully scented leather, the harness is incredibly comfortable and supple. The outside of the leather is the grain side, and the inside is the suede back. Putting the harness on is like a dream; if you love the feel and scent of leather, a leather harness is the way to go. It is thicker leather, so it is sturdy and stays up incredibly well. The leather does shed a bit, but it is surprisingly minimal; the edges are all cleanly cut as well, so the leather will not scratch or scrape during wear.

Because the harness is a double-strap harness, it can be adjusted both around the hips and around the thighs/bottom. The hip strap is adjusted by buckles; they are not locking, but they are sturdy buckles that do not come undone; the thigh straps are both sliding straps, with double d-rings to adjust the fit. The hip straps are rounded on the end, and the thigh straps are cut into a point. On the back of the harness is the corset-style back, with seven grommets on both side and Para cord lacing. There are also two large d-rings on the back; use these for whatever purpose suits you.

The leather is all either singly, doubly, or triply riveted, creating a workhorse of a harness. It isn't coming apart, that's for sure! Keep in mind that all of the rivets and grommets are metal, so if you have metal allergies, be cautious when purchasing this harness.

In the front of the harness are the two O-rings; the interchangeable O-ring utilizes three snap straps, and the harness itself has an O-ring that is not interchangeable. These are perfect for those who like double-penetration or who use double-ended attachments. The O-ring that comes with the harness is metal and has a diameter of 1 3/4", but because it is interchangeable, silicone and rubber (or smaller/larger diameters) will work as well.

The entire harness is stitched at the edges, giving it a finished look that is very pleasing to the eye. It definitely is a harness to be proud of owning and wearing, given its showy color and attention to detail.

Along the hip straps are eleven holes for adjustment, each placed 5/8" apart. The harness can feasibly fit sizes from 24" to 40" approximately, with the corset back fully tightened. However, the corset back can be loosened to add another six to eight inches about, only using the lacing that it comes with, allowing for adjustment up to about 50". Additionally, the hip straps have two extra inches without holes. That being said, the harness should accommodate a wide range of sizes.

For me, the thigh straps were incredibly long, but this is a good thing for those who need more length. They are each a length of about 25". They can be cut shorter if this length is too much for you.

Through use, the harness stays up incredibly well. It doesn't slide, though it may have to be tightened or adjusted periodically (it's leather, it stretches). Putting it on is simple and requires little effort, though I do always recommend doing so before using it for the first time; this way, minimal adjustments will need to be made in use. All of the straps are incredibly comfortable and do not dig or cut into the skin at all. It held up my heavier prosthetics pretty damn well, so I see no reason why there should be a problem with use.

When using dildos or attachments with testicles, make sure that the diameter of the dildo will fit in the leather O-ring (the one that is not interchangeable). It only has a diameter of 1 3/4", and because the testicles will not fit on the outside comfortably, it must be pulled through the triangle front piece.