These are used for hands free nipple stimulation. If you have nipples, then these will work for you. I found that these work great for us when I have the wife tied up. I can put them on her nipples, and concentrate on her clit and g-spot. They leave my hands free to explore other areas on her body.

These care be used just about anywhere. I would suggest you keep them away from water, as they are made from steel and steel rusts. They can be used during intercourse. They stay put for the most part. The magnets are on the stronger side, and should provide plenty of pressure on your nipples. If you need a lot of pressure on your nipples to be stimulated, then these might not be strong enough for you. I found them plenty strong enough, as did my wife.

I suppose you could use these on other body parts. I cant really think of any body parts that these would fit on, and/of stay on. The opening is on the small side.

The packaging states that these are made from "high quality steel". I find that laughable. The finish job is poor. You can see many flaws on the surface, and I mean many. On just one clamp, I have found over 20 flaws on the surface. None of them are on the bars that press against your nipples, but still! If you are going to claim that your product is "high quality", make sure your product is somewhat high quality.

The surface is smooth by design (except for the flaws). I has the looks of a cheap chromed metal piece. I did not find any seams.

I just feel that these would be so much better if they were made from stainless steel. Not only would they last longer, but they would also be sanitize-able.

As you can see from the product picture, this are pretty simple in design. The magnets are pretty strong. The bars that hold the magnets are difficult to slide open and closed at times. This is due to the poor construction and finish. The bars also spin 360 degrees. You have to play with them at times to get the bars to sit inline with the outer frame, so that it sits right on your breasts. But that may just be my problem, as I am slightly anal about things.

This should fit just about any sized nipples. They open up to just over 1/2 inch. I have never seen a nipple with a larger diameter then 1/2 inch, so these should fit just about anyone. And because they are held closed with magnets, it will fit every nipple smaller then 1/2 inch diameter like they were custom made just for your nipple size.

Like I stated above, the pressure is pretty strong. I find it just a touch too much. And it is hit or miss with my wife. Sometimes she likes strong pressure on her nipples, and other times it bothers her.

Because these say they are made from steel, I would not recommend getting them wet during the clean up. This makes it hard to care for these, especially if you share them with a partner. My wife and I have no problem sharing most toys, so this is not something we have to worry about too often. But some of you do. I would suggest using a toy cleaner to keep these somewhat clean. And if you are worried about sharing, then just take the safe route and buy two pairs; one for each of you.

I just feel that if you get these wet, they will rust on you. I see nothing telling me that these are stainless or aluminum. I would just not take the risk with water.

For storage, we just toss them in the toy drawer. You could keep the box, but it is not discreet. Plus it is a lot bigger then the clamps, so it will take up more storage room. And for those of you whose storage room comes at a premium like us, larger then need packaging does not work for storage. We just don't have the room. So far we have not had a problem with tossing these into the toy drawer. They have held up nicely. Plus they are attracted to each other, so you wont have to go searching for the missing piece to the pair.

These come in a small cardboard box. The box has a huge picture of a clamp on a nipple for the front cover; and on the back cover it has a picture of a naked woman with clamps on both of her nipples. It is not discreet at all. The good thing is that you will not need this packaging for storage. We tossed out packaging as soon as we opened it up to use the clamps.

The clamps sit inside the packaging in a tray. The tray is wrapped with bubble wrap. The nipple clamps are well protected during shipping.

This does not really come with any information either written on the outside of the packaging, or included on a pamphlet stuffed inside. I find this frustrating for a couple of reasons. I feel that these companies should be helping us get the most out of the toys we purchase from them, and get the longest use from them before being needed to be replaced. How can we properly care for our toys with no care instructions?

This have worked about half the time for us. Sometimes they are too much for my wife. Other nights she loves them. It just depends on how her nipples feel. When she is feeling these, they work great. They have stayed on every time. It might be different if she was bouncing around and bumping her breasts into sheets and what not, then they might not stay on her nipples. But when she is tied up, they work great. If she is free and wearing them, and I don't play with her boobs; then they will also stay on.

We also have not washed these in soap and warm water. So they still look like they were just taken out of the package. I would not expect them to stay this shinny for as long as they have. But then we don't get them wet. Like I warned above, if you get them wet; expect them to start rusting on you. They are made from cheap materials. The nice part is that I did not pay too much for them, so I am not that upset about the cheap steel. I would not mind paying another 50%-100% more for a stainless steel version for these. I prefer to purchase toys that are built to last, over toys made from cheap materials that sell for less.