These neck to wrists restraints are used to explore your fantasies with restraint play. Restraints add the thrill of being bound and finding trust with your partner. When taking away a sense such as touch, this enhances your other senses. These restraints keep your hands at bay for a touch-free experience. Sensory play is a typical type of play when restrained. Being bound not only can spice up your love life, but it also adds trust and communication. Always remember safety with restraints and the use of a safe word. I suggest these be used by more advanced users since a collar is involved and the weight of them is pretty heavy.

So let's start with the overall look of the entire item. They are like I stated above, heavy duty. They are made of tough leather including heavy metal buckles and rivets. The padding to the collar and wrist cuffs is soft and thick enough to feel protected and safe. The leather is stiff so just be mindful of maybe breaking them in by bending them or however you like to "soften" the leather. The stitching is well done and strong. There is no fraying or falling apart after use and cleaning. The buckles are riveted on the leather adding weight and design, but also holing the restrains together. Okay, now one section at a time....

The Collar
The collar is about 13 inches long and approx. 2 1/4 inch wide. This section is all padded.
The tail end of the buckle or laver lay has approx. 5 inches hanging off the collar. This can add length if the padding is not long enough for your neck. This area is not padded so if you need to use the overlay just keep that in mind.
The total diameter of the collar on the largest setting is approx. 5 inches and on the smallest approx. 3 1/4 inches.
The buckle has 5 holes to buckle into. However, I was unable to get in on the smallest hole. So the smallest size above is actually only on the 4th hole (from the largest setting). The loop on the buckles (both collar and wrist) have small holes. This is typical of restraints. These can be used for small locks if you so desire. I have some, so I used them. This adds some more weight and really locks you in place.
There are 3 D-rings in the front of the collar, I assume for just design. It does add a little character which I like. I did use a couple of metal clips to connect the wrist cuffs (picture below) to the collar (not an ideal situation but exploring outside of the box). These buckles did not slip out while in use so you don't need the locks. Locks are not included. The collar was comfortable to wear. I did find it to be a little wide for my liking, but I got used to it once I had in on for a few minutes. Definitely not a flaw.
The middle D-ring in the front has the belt sewn in that lowers down to the wrist cuffs. This also can be adjusted in length.

The Belt.
The belt has an over on the length of approx. 22 1/2 inches on its longest setting and approx. 17 inches at its shortest setting (my preference). There are 7 holes in the belt to adjust, which is a fairly well selection of sizes. The belt is thick and well made. It is used just like a typical belt. However, it comes apart in 2 pieces.

The Wrist Restraints
The wrist cuffs are very similar to the collar. The overall cuff is approx 8 1/2 inches; this includes the padding and 2 1/4 inches wide. There is approx. 5 1/2 inches of the overlay from the belt on the cuff. This will add more length if needed to fit around your wrist. Just like the collar. No padding on the overlay obviously.
The smallest setting has a diameter of approx is 1 3/4th inches. The cuffs have the same problem as the collar that you cant get it physically on the smallest setting when dealing with the holes to buckle into. The cuffs have 5 belt holes as well.
The largest setting has a diameter of approx. 3 inches.
The cuffs feel very comfortable on, and they are riveted into the bottom of the belt that is attached to the collar. I did not feel the rivets when wearing the cuffs.

When it came to performance, I was actually pretty impressed. The leather is so stiff; I really had to break them in. I was nervous that the stiffness would make it hard to wear them, but I was wrong. The collar like I stated above is a little thick for my liking, but it grew on me. The collar didn't actually fit around my neck, so I actually made a hole to buckle into. Works perfectly. I don't think plus size, or wide neck friends would benefit from these restraints, unfortunately.
The cuffs were very comfortable and fit nicely. The only thing I wish is that cuffs were on back to back from each other. There is about a 2-inch gap between the cuffs and my wrist, so these were just not level when wearing them. I just kind of felt awkward.

Since there was no literature with this toy, I am just telling you what worked for me when cleaning. It is real leather so I would recommend a damp cloth or a toy cleaner. It doesn't need to be conditioned or anything over the past month I have used it. Maybe over time if it cracks, but I honestly don't see that happening. I would not submerge this toy in water either.

As stated above this toy does come apart at the belt section, however, with the padding and stiffness of the toy, I find it extremely difficult to store. It does all flatten out and can be put away nicely if taken apart. If you don't and store it all connected, it is bulky and hard to store.

Packaging was poor. This toy was just folded into a box. No literature or any other material with this toy. Anyone who reads my reviews knows I am not a fan of this. However, it doesn't take away how well the toy is.

Please excuse the orientation of some of these pictures.