This is the first time I've said "It's too hard!"
I think this is a cute thing for a couple to do together, but the product that resulted both times was not usable. I often joke that I could use it as a hammer or a door stop. Possibly bookends, since I have two!
Published:
Pros
Fun, makes a pretty detailed clone, accommodates large penis, no strong smell, easy cleanup.
Cons
Can be messy making it, rubber is TOO HARD when it is fully set.
I was so excited about this product. My boyfriend was not into it at all, but I got him to do it. He thinks it's weird that there is a replica of him. Actually, there are two, but we will get to that part later.
The package included molding powder, a jar of clear liquid silicone and a jar of hardener liquid that also provides the color. a mini thermometer, a mixing stick, and the molding tube. The tube it comes in acts as the molding tube, and you simply cut it to the length you need. It also included very detailed instructions. Mine also came with a DVD that you could pop in and watch the process.
The first time we tried this, my boyfriend was in charge of mixing the powder while I performed oral on him to get the best possible erection. However, he actually lost focus on the powder mixing and the stuff gelled up in the bowl. I guess I was too good at my job. ;-) So... we had to call the company and order more powder. It is VERY important to do this in the time allotted, which is about 60 seconds from beginning to mix until penis is inserted in mold.
When the second batch came, we got it right. This is VERY messy though. I highly recommend that you put down newspaper or a towel you don't mind losing. After mixing all the ingredients with the right temperature water, you have to quickly pour it in the mold. After that, you have to insert the penis into the mold and that will cause the plaster mix to overflow. These two actions are where you will have the most mess.
After it starts to harden, he will pull out, which should be easy because he will have gone soft by then due to the weird cold feeling in the tube of goo! He will need to shower to remove the materials from his skin and hair if there is any.
Mixing the two different liquids is the easy part, and then you simply pour it in the mold. You have the option to use the vib or not. We did, and that gets inserted and held up while it sets by a piece of cardboard. It will not be ready to use until at least the next day.
Unfortunately, this product resulted in a "clone" that was TOO hard to enjoy. We did try it, but it almost felt like it hurt my insides and could do some significant damage if used incorrectly. A real penis has a little give to it. Most dildos do also. This did not. Especially with the vibrator up the center. The vibrator wasn't very strong. You cold feel vibrations up the shaft, but not in the tip. It just wasn't long enough.
We did call the company and they sent us a new kit. We tried again and opted NOT to use the vibrator, hoping to get a little more flexibility to it. We also used slightly more silicone, and a little less hardener. There was very little difference. That one we had even more time to work with and we already knew what we were doing.
The package included molding powder, a jar of clear liquid silicone and a jar of hardener liquid that also provides the color. a mini thermometer, a mixing stick, and the molding tube. The tube it comes in acts as the molding tube, and you simply cut it to the length you need. It also included very detailed instructions. Mine also came with a DVD that you could pop in and watch the process.
The first time we tried this, my boyfriend was in charge of mixing the powder while I performed oral on him to get the best possible erection. However, he actually lost focus on the powder mixing and the stuff gelled up in the bowl. I guess I was too good at my job. ;-) So... we had to call the company and order more powder. It is VERY important to do this in the time allotted, which is about 60 seconds from beginning to mix until penis is inserted in mold.
When the second batch came, we got it right. This is VERY messy though. I highly recommend that you put down newspaper or a towel you don't mind losing. After mixing all the ingredients with the right temperature water, you have to quickly pour it in the mold. After that, you have to insert the penis into the mold and that will cause the plaster mix to overflow. These two actions are where you will have the most mess.
After it starts to harden, he will pull out, which should be easy because he will have gone soft by then due to the weird cold feeling in the tube of goo! He will need to shower to remove the materials from his skin and hair if there is any.
Mixing the two different liquids is the easy part, and then you simply pour it in the mold. You have the option to use the vib or not. We did, and that gets inserted and held up while it sets by a piece of cardboard. It will not be ready to use until at least the next day.
Unfortunately, this product resulted in a "clone" that was TOO hard to enjoy. We did try it, but it almost felt like it hurt my insides and could do some significant damage if used incorrectly. A real penis has a little give to it. Most dildos do also. This did not. Especially with the vibrator up the center. The vibrator wasn't very strong. You cold feel vibrations up the shaft, but not in the tip. It just wasn't long enough.
We did call the company and they sent us a new kit. We tried again and opted NOT to use the vibrator, hoping to get a little more flexibility to it. We also used slightly more silicone, and a little less hardener. There was very little difference. That one we had even more time to work with and we already knew what we were doing.
Experience
The jars of liquid silicone and hardener are strong smelling, but I was surprised that after the clone was finished, it really didn't maintain a strong smell. It wore off rather quickly just by being left out to air dry.
Follow-up commentary
11 days after original review
I've done some checking around, and EdenFantasys still has the best price available on the internet for this product. Try this out for some fun with your partner.
This content is the opinion of the submitting contributor and is not endorsed by EdenFantasys.com
EdenFantasys Review Program
- Get Free Toys
- Enjoy Special Deals
Comments
Subscribe to comments
-
helpful review!
-
Thanks for sharing.
-
great review
-
great review
-
Thanks for the review
-
Thanks for the review
-
Thanks for the review. I wondered about how it would set.
-
Great review. I liked the step by step process of how it worked and what didn't work so well.
-
Thanks
-
Thanks for the review!
Forum
Discussion | Posts | Last Update |
---|---|---|
#AskEden - Clone-A-Willy in other colors? | 9 | |
Did you have complications with this kit? | 5 | |
Any Clone-A-Willy products that use a better material? | 9 | |
Have you Cloned-A-Willy? | 21 | |
clone a willy | 17 | |
material safety and cleaning? | 3 | |
Clone-a-willy construction! | 27 | |
Curious | 4 |
- See all discussions
Thank you for viewing Clone-a-willy kit – secret dildo review page!