So you've always wanted to have a your man's cock in vibrator form? Well, you can. The Clone-A-Willy kit comes with everything you need to make a replica of his willy.

The standard kit comes with a 5-1/4" vibrator. This size works for almost any penis size, however, if your penis is larger than 9", you may need to purchase the larger 7" vibrator separately. The vibrator only has one steady speed. I would say in comparison to other vibrators I used, that it's somewhere close to a med/high speed. You can definitely feel the vibrations. You need one AA battery (which isn't included) to operate the vibe. Also included are molding powder, liquid rubber, patented "Liquid Skin", a stir stick, and a clear plastic tube.

The steps to make your own vibrator are fairly simple, but it's important to follow the directions. Timing is everything.
Step 1 Cut the tube to size
Step 2 Adjust tap water to exactly 98 degrees and measure out 1-3/4 cups
Step 3 Start your timer and pour the water into a mixing bowl. Pour molding powder into water. Stir mixture for about 60 seconds and pour into your molding tube (you must do this quickly as you only have about 2 mins until your mold sets up).
Step 4 Insert your erect penis into the tube. If your penis is touching the side of the tube, rotate it to adjust the placement. After removing your penis from the tube you must let the mold set for a couple of hours before moving on to the next step.
Step 5 Open the bottles of liquid rubber and liquid skin and empty into a clean, disposable container.
Step 6 Stir mixture thoroughly for 2 mins. Then, pour the mixture into the mold until it is about an inch from the top.
Step 7 Get a small square of cardboard and cut and X in the center of it. Push the vibrator through the X until only the screw cap sticks out the one end. Insert the vibrator into the center of your rubber filled mold so that the cardboard sits flat against the end of the tube. Let this sit for 24 hours before removing your clone from the mold. Touch the rubber to make sure it's fully cured before removing.

Empire Labs put together a useful video on the how to if you need visual instructions.
https://www.youtube.com/watch?v=LjKBlsKv1LQ

Okay, so here's what I thought about it. The packaging was definitely not discreet. It comes in a large box with Clone-A-Willy in big print on one side and pictures of cocks on the other side. I know that their own "liquid skin" is in the mixture, but there isn't anything about this that feels like skin to me. It's a little better than other rubber vibrators, but it's not something I'd write home about. I found that because of the odd texture, I had to use a lot of lube or a condom to be able to insert it. The smell was probably the biggest turn off. It smelled like rubber cement. The smell lasted a long time. I've owned this vibe almost 2 years now and it kept that rubber cement smell for well over a year. It cleans easy with mild soap and water or toy cleaner. What I did actually like about it was that I could still feel like I was fucking my man when he wasn't around. My husband was deployed for a year, so this was our way for him to fuck me while he was on the other side of the world. It really was easy to make, but as I said before, you must follow the directions and make sure you keep track of the time. My husband and I made this together and I would say that it's probably easier to do with 2 people than it is alone. It's not the strongest vibrator I've used, but it does have a decent amount of power. The molding material is really good. It captures every fold and vein.