#BuildaBetterEden - Community Planning: 09.22.2011

Contributor: Antipova Antipova
Quote:
Originally posted by ToyTimeTim
Oh sure, feel free. They are for all to see. I have another one planned to show the strength of silicone, planning a stretch test and flame test...with a Oxy-Acetylene torch.
You'd better test with a match first, because I'm almost sure an oxy-torch is going to melt it!

(And keep that thing away from my Njoy toys!
09/22/2011
Contributor: Kindred Kindred
Quote:
Originally posted by aliceinthehole
i wonder where everybody is? only 8 unique posters? how many contributors does EF h ave... i wonder? anybody have a rough estimate, just out of curiosity?

its a community planning meeting... i wish everybody coulda come.

*pouts a bit ... more
Unfortunately, this is a pretty typical turn out. It would be great if more contributors would get involved but we've struggled with that.
09/22/2011
Contributor: Antipova Antipova
Quote:
Originally posted by aliceinthehole
i wonder where everybody is? only 8 unique posters? how many contributors does EF h ave... i wonder? anybody have a rough estimate, just out of curiosity?

its a community planning meeting... i wish everybody coulda come.

*pouts a bit ... more
I feel like the whole site's been a little quiet this month.
09/22/2011
Contributor: aliceinthehole aliceinthehole
Quote:
Originally posted by Antipova
You'd better test with a match first, because I'm almost sure an oxy-torch is going to melt it!

(And keep that thing away from my Njoy toys!
matches supposedly dont kill silicone.. or even phase it, so i've heard.

have you tested it?
09/22/2011
Contributor: Starkiller87 Starkiller87
Meant to be here earlier was having an anxiety problem. Talked to my dad all is better. Sorry Im late.
09/22/2011
Contributor: Jul!a Jul!a
Quote:
Originally posted by aliceinthehole
i wonder where everybody is? only 8 unique posters? how many contributors does EF h ave... i wonder? anybody have a rough estimate, just out of curiosity?

its a community planning meeting... i wish everybody coulda come.

*pouts a bit ... more
There are a few folks that used to make it, but haven't been here in a while for whatever reason. There are a lot more than 8 contributors here
09/22/2011
Contributor: aliceinthehole aliceinthehole
Quote:
Originally posted by Kindred
Unfortunately, this is a pretty typical turn out. It would be great if more contributors would get involved but we've struggled with that.
maybe we should give out candy as an incentive.
09/22/2011
Contributor: ToyTimeTim ToyTimeTim
Quote:
Originally posted by aliceinthehole
i wonder where everybody is? only 8 unique posters? how many contributors does EF h ave... i wonder? anybody have a rough estimate, just out of curiosity?

its a community planning meeting... i wish everybody coulda come.

*pouts a bit ... more
It's hard to say, there are so many contributors that do not participate in the forums and many that do not come around all that often.
09/22/2011
Contributor: aliceinthehole aliceinthehole
Quote:
Originally posted by Starkiller87
Meant to be here earlier was having an anxiety problem. Talked to my dad all is better. Sorry Im late.
glad you're feeling better lady. sending a cyber hug.
09/22/2011
Contributor: Kindred Kindred
Quote:
Originally posted by Antipova
You'd better test with a match first, because I'm almost sure an oxy-torch is going to melt it!

(And keep that thing away from my Njoy toys!
I'm pretty sure that's Tim's intention.
09/22/2011
Contributor: Jul!a Jul!a
Quote:
Originally posted by ToyTimeTim
No problem here. If I may ask, where you going? Some place fun I hope?
Las Vegas. My husband and I are going with our car club president for the Las Vegas Supershow. I'll finally get to meet other people from our club outside of our chapter lol.
09/22/2011
Contributor: Elaira Elaira
I have a vacation to Miami from the 13th-17th to see my family, but I plan to keep up on things while I'm gone.
09/22/2011
Contributor: Jul!a Jul!a
Quote:
Originally posted by Antipova
I feel like the whole site's been a little quiet this month.
Everybody's getting back into the school groove right now I think.
09/22/2011
Contributor: aliceinthehole aliceinthehole
Quote:
Originally posted by Jul!a
Las Vegas. My husband and I are going with our car club president for the Las Vegas Supershow. I'll finally get to meet other people from our club outside of our chapter lol.
ooh hope you have something hot to wear!
09/22/2011
Contributor: Jul!a Jul!a
Quote:
Originally posted by Starkiller87
Meant to be here earlier was having an anxiety problem. Talked to my dad all is better. Sorry Im late.
Glad you could make it at all, hope everything's going ok now!
09/22/2011
Contributor: Antipova Antipova
Quote:
Originally posted by aliceinthehole
matches supposedly dont kill silicone.. or even phase it, so i've heard.

have you tested it?
Oh yeah, I've tested a few things. With the stuff I'm sure about, like Tantus, I don't bother testing it... but I got a silicone butt plug from CalEx which I tested and it passed, and a "silicone" wand attachment from the company which makes Fairy wands, which failed. In their defense, they never claimed it was silicone, but EF's product page did.
09/22/2011
Contributor: Starkiller87 Starkiller87
Quote:
Originally posted by aliceinthehole
glad you're feeling better lady. sending a cyber hug.
Thanks. It wasnt that bad considering I didnt take medicine to calm down. Its what I get for being stubborn and not taking my daily pills. But all is well, and I will live to fight another day. haha
09/22/2011
Contributor: Antipova Antipova
Quote:
Originally posted by Starkiller87
Meant to be here earlier was having an anxiety problem. Talked to my dad all is better. Sorry Im late.
Enjoy a nice glass of warm milk with cinnamon now that things are better? Also, welcome!
09/22/2011
Contributor: Elaira Elaira
Quote:
Originally posted by Jul!a
Las Vegas. My husband and I are going with our car club president for the Las Vegas Supershow. I'll finally get to meet other people from our club outside of our chapter lol.
Ahh! I might be going to Vegas in Jan for the AVN/ANE stuff. Hooray for being 'in the industry' with my job!
09/22/2011
Contributor: Jul!a Jul!a
Quote:
Originally posted by aliceinthehole
ooh hope you have something hot to wear!
I have... my club Dickies shirt! lol

And some other outfits as well. I have to root through my closet for "hot club wear" this weekend anyway, I'll spend some time picking out some Vegas outfits lol.
09/22/2011
Contributor: Kindred Kindred
Quote:
Originally posted by Jul!a
Las Vegas. My husband and I are going with our car club president for the Las Vegas Supershow. I'll finally get to meet other people from our club outside of our chapter lol.
Have a great time!
09/22/2011
Contributor: ToyTimeTim ToyTimeTim
Quote:
Originally posted by Antipova
You'd better test with a match first, because I'm almost sure an oxy-torch is going to melt it!

(And keep that thing away from my Njoy toys!
I have done the match testing, even used a lighter. But I want to show how much heat they can take.


Stainless takes more to melt that a torch will produce, typically.
But what if I could make it a pretty blue color?
09/22/2011
Contributor: Jul!a Jul!a
Quote:
Originally posted by Elaira
Ahh! I might be going to Vegas in Jan for the AVN/ANE stuff. Hooray for being 'in the industry' with my job!
If you do, take lots of pictures and tell us all about it please.
09/22/2011
Contributor: Elaira Elaira
Quote:
Originally posted by ToyTimeTim
I have done the match testing, even used a lighter. But I want to show how much heat they can take.


Stainless takes more to melt that a torch will produce, typically.
But what if I could make it a pretty blue color?


I'd be all over it.
09/22/2011
Contributor: Antipova Antipova
Quote:
Originally posted by Jul!a
Las Vegas. My husband and I are going with our car club president for the Las Vegas Supershow. I'll finally get to meet other people from our club outside of our chapter lol.
Wait, we have club chapters? I want to go to a pot-luck!
09/22/2011
Contributor: Antipova Antipova
Quote:
Originally posted by ToyTimeTim
I have done the match testing, even used a lighter. But I want to show how much heat they can take.


Stainless takes more to melt that a torch will produce, typically.
But what if I could make it a pretty blue color?
That's what I was warning you against. And, yeah, yeah, you could polish it down... but then it wouldn't be symmetrical anymore!
09/22/2011
Contributor: Starkiller87 Starkiller87
Quote:
Originally posted by Antipova
Enjoy a nice glass of warm milk with cinnamon now that things are better? Also, welcome!
I think milk might be the problem actually. I made some hot chocolate and starting feeling really sick and gave myself an anxiety attack thinking of all the things that could be wrong. Im in complete denial over my lactose intolerance because I love dairy so much and dont want to accept it. Ill believe anything before that being the problem. Im ridiculous.
09/22/2011
Contributor: aliceinthehole aliceinthehole
Quote:
Originally posted by Starkiller87
Thanks. It wasnt that bad considering I didnt take medicine to calm down. Its what I get for being stubborn and not taking my daily pills. But all is well, and I will live to fight another day. haha
shit... you just reminded me to take mine...


i'm not stubborn just forgetful. (and occasionally lazy... alright alright.)
09/22/2011
Contributor: Jul!a Jul!a
Ok, so the first thing I want to talk about a little bit is a few announcements. There's not a ton of info on either of these yet, but I wanted to let you know about them. The first is toy parties. I know everybody's jonesing to get this kicking, and we're starting on it. Right now I'm working on some mockups of things, and it's a little slow going at the moment, but it's going.

We're also working on a program and it's in the beginning stages right now, but I think you'll like the idea. I know a lot of you really know your stuff, and we'd like to extend an opportunity for you to help regular customers a bit. Gary will be starting some polls soon to get more feedback, but how do you guys feel about answering product questions for customers with a live chat client? Something like what our expert help program was designed to be, not a replacement for customer service by any means.
09/22/2011
Contributor: Elaira Elaira
On another note, someone needs to bring Sam and me some dinner to keep us from eating ketchup and tartar sauce packets.
09/22/2011